R82 Multi Frame

Several R82 frame options are available for the x:panda shape, and the seats can be mounted either directly onto the frames or by using an adapter. This adapter is for x:panda shape size 3 seat for use on Multi Frame, Multi Frame:x, Combi Frame:x, Strong Base and High-low:xo.

Rebuilds your frame to accommodate a different type of seat.

The foot plate, model Wombat can be adjusted in height and angle to accommodate the lower leg length and angle joint range of movement of the user. This foot plate has a 10 cm mounting fitting, which limits its possibilities to be positioned closer than 10 cm to the point of fixation of the rod for single foot support. This can be done by using the Foot plate. A position above the point of fixation of the rod for single foot support can be obtained by using the foot support in combination with Mounting for raised support. The foot supports are mounted using a single rod for foot support.

The foot plate can be adjusted in height and angle to accommodate the lower leg length and angle joint range of movement of the user.The mounting fitting of this foot plate is positioned below the foot plate, which limits its possibilities to positioned close to the floor. Positioning closer to the floor, i.e., when used in combination with the High-low:xo can be obtained by using the foot plate, model Wombat with mounting fitting.

Creates a soft surface around the rod for the foot support.

Foot plate padding for foot plate, model Wombat. The padding changes the hard surface of the foot plate to a soft surface. The solution should be considered for users who often use the foot plate without braces or shoes. Foot plate padding can be used with the foot box kit or ankle straps.

Plate corners and padding for foot plate, model Wombat. The foot box kit provides a soft surface around the feet of the user. The solution should be considered for users with involuntary movements of the feet as an alternative to the use of ankle straps.

Keeps the feet placed in the foot box. The strap is used with with the foot box kit

Accessory for individual multi adjustable foot support. Increase the width between the fixation of the foot support rod and thus the possibilities to accommodate users with severe limitations in their hip abduction and rotation and users with severe asymmetry in their legs

The Oxygen bottle holder allows for a range of differently sized bottles to be brought along. The bottle rest on a five cm foot and the straps accommodate a wide range of shapes and sizes of bottles. The holder is attached to the crossbar under the Multi Frame either to the right or the left. The detachable part of the oxygen bottle holder is then put on top and fixed by a finger knob. This makes it very straightforward to remove the oxygen bottle when the Multi Frame is used for transporting the user in a motor vehicle.