With the connecting bolts, the seat height is set. To achieve very low seat heights, 22” or 20” rear wheels and thereto belonging front forks are available.
Next is equipped with hub brakes. Perfect function independent of tire pressure and no readjustments if rear wheel position or size
The swing away leg supports are detachable and lockable. Choose between a standard or narrow knee angle. The narrow version can be combined with 150 mm (6”) castors.
There are four different seat angle positions: +3°, 0°, –3° and –5°. The angle is easily set by changing the position of the rod.
Lockable arm support
Lockable, detachable and height-adjustable.
Long and short version.
Arm support cover
Detachable and washable.
Arm support pad, wide and soft
Fitted onto the existing arm support.
Size 8 x 40 cm (3¼" x 15¾"). Fits both short and long arm support, right and left side.
Hemi arm support pad hemi
Adjustable in angle, the height is set with the arm support adjustment. Fitted onto the long arm support. Padded detachable cover in dark grey plush.
Standard leg support.
Narrow leg supports
The narrow leg support brings the foot support 6 cm (2½”) closer to the seat.
Elevating leg support
<p>Includes a flip-up calf support with two height options. Fits both left and right side. From seat width 40 cm (16”). Foot support is not included.
Cover, calf support
For angle-adjustable leg support above.
In dark grey plush or black Dartex.
Adjustable foot support angle
The foot supports are continuously angle-adjustable.
Extended foot support
Enlarges the foot support depth. Fitted on the existing foot support.
Adjustable length. Not compatible with the extended footrest.
One-piece foot support
Foldable to one side, adjustable in length and angle.
Detachable and adjustable in length. Attached with velcro straps on the leg supports at required height.
Padding for calf strap
Provides a softer support.
Available in 20 cm (7¾"), 30 cm (11¾")
and 40 cm (15¾") lengths.
Counteracts risk of tipping for amputee users.
Amputee leg support
Adjustable height, length and angle. Fits both left and right side.
Leg support for plaster
For full leg plaster cast. With separate cushions, adjustable in height, depth, angle and also sideways. Available for left and right side. Foot support is not included.
Integrated wheel lock
The wheel lock is integrated with the hub casing. No adjustment needed when changing rear wheel position
Adjustable push handle height
The push handles are height-adjustable.
Supplements to the standard hub brakes.
One hand brake
Right or left side. Can be
combined with drum brake wheel.
Rear wheels and tyres
3 alternative rear wheel sizes, 24” (standard), 22” and 20”. Choose either solid or pneumatic, with high-pressure (standard) or low-pressure inner tubes.
There are three types of handrims to choose from: aluminum (standard), stainless and plastic coated.
5”, 6” (standard) and 7” all-round (130 mm, 150 mm and 180 mm).
Grey or yellow logo.
Comfort back support cover
Covers the back support tubes.
Available as an alternative to the push handles. Detachable and height adjustable. Here showed in combination with a head support.
Rear cross brace
Provides additional stability. Foldable with snap lock on one side. Standard on Cross 5 XL.
Back support wedges
For additional support and comfort. Are fitted with velcro under the back support
Two frame lengths
Next is available in two frame lengths.
The seat tubes are placed in cup-shaped attachments on the frame. This provides extra stability.
The solid seat gives the user a stable base of support. It is removable and must be equipped with a cushion. Available both for short and long seat. Easy to remove.
Anatomically shaped with a washable cover in dark grey plush. The seat cushion must be cut to the adjusted seat depth.
Provides extra seat contour. To be placed inside the seat cushion cover.
The anti-tippers are easy to flip-up and fold down. Shorter anti-tippers are available for 20” rear wheels.
Transparent. Fits onto long arm supports.
Hemi tray, foldable
Adjustable in depth and width. Folds sideways. Attached to the arm support brackets.
The height is set using the arm support.
With snap-lock, length adjustable. Two alternative attachment points on the frame.
In two parts; the cup is fitted to the inside of one of the tilters and the elastic strap is fitted around the cane.
Contains three ring spanners, five Allen keys, one socket spanner and one Phillips screwdriver.
With the five velcro straps and cover the back support is contoured to support the user ́s back.